Cảm biến
Thiết bị Camera công nghiệp
Thiết bị điều khiển
Thiết bị đọc mã vạch
Thiết bị IOT
Thiết bị khư tĩnh điện
Thiết bị phòng QC/Lab
Thiết bị tủ điện
FR-7N3104BT Fiberroad
- Support up to 4 ports x 10/100Base-T or 10/100/1000Base-T and 1×100/1000Base-X SFP
- Full/Half-duplex self-adaptation
- MDI/MDIX automatic recognition
- Optionally support IEEE 802.3af/at PoE+ Standard, without damaging not-PoE devices.
- Jumbo Frame up to 9K, 12G backplane bandwidth
- Working temperature -40 to 75℃
- Wide-range DC9~56V power input
- Support power input polarity protection; no worries about the reverse connection
- Aluminium shell, fanless design
- Free fall, shock-proof and vibration-proof for industries
- Plug and play; no software configuration is needed
| Ethernet Interface | ||
| Model | FR-7N1104/FR-7N1104P/1104BT | FR-7N3104/FR-7N3104P/3104BT |
| Ports | 4×10/100Base-TX Port(RJ45)
1x100Base-X(SFP/1×9) |
4×10/100/1000Base-TX Port(RJ45)
1x1000Base-X(SFP/1×9) |
| Port Mode(Tx) | Auto Negotiation Speed
Full/Half Duplex Mode Auto MDI/MDI-X Connection |
|
| Standards | IEEE 802.3 for Ethernet
IEEE 802.3u for Fast Ethernet IEEE 802.3x for flow control and back pressure IEEE802.3az for Energy Efficient Ethernet(EEE) |
IEEE 802.3 for 10BaseT
IEEE 802.3u for Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3x for flow control and back pressure IEEE802.3az for Energy Efficient Ethernet(EEE) |
| Packet Buffer Size | 512K | 1M |
| Maximum Packet Length | 9K | 10K |
| MAC Address Table | 4K | 4K |
| Transmission Mode | Store and Forward (full/half duplex mode) | |
| Exchange Property | Delay time: < 7μs
Backplane bandwidth: 1.25G |
Delay time: < 7μs
Backplane bandwidth: 12G |
| Physical Characteristics | |
| Housing | Aluminium case |
| IP Rating | IP40 |
| ESD Protection | 6kV |
| EFT Protection | 6kV |
| Dimensions | 120mm x 90mm x35mm (L x W x H) |
| Installation Mode | DIN Rail/Wall Mount |
| Weight | 400g(without PoE） |
| Working Environment | |
| Operating Temperature | -40℃~75℃ (-40 to 167 ℉) |
| Operating Humidity | 5%~95% (non-condensing) |
| Storage Temperature | -40℃~85℃ (-40 to 185 ℉) |
| Heat Dissipation | 10 BTU/h (Non-PoE)
420 BTU/h (30W PoE) 1260 BTU/h (90W PoE) |
| Cooling | Passive Cooling |
| Noise Level | 0 dBA |
| PoE & Power Supply | ||
| Model | FR-7N1104P/3104P | FR-7N1104BT/3104BT |
| PoE Ports | Port 1 to 4 IEEE802.3af/at @PoE+ | Port 1 to 4 IEEE802.3af/at/bt @PoE++ |
| Power Supply Pin | Default: 1/2(+), 3/6(-) | Default: 1/2(+), 3/6(-) or 4/5(+), 7/8(-) |
| Max Power Per Port | 30W | 90W |
| Total PWR /Input Voltage | 120W(DC48-56V) (Model dependent) | 360W(DC52-56V) (Model dependent) |
| Power Consumption | 3 Watts Max(without PoE load) | |
| Power Inputs | 2 | |
| Input Voltage | 9-56VDC,Redundant dual inputs | |
| Operating Voltage | Non-PoE Mode: 9-56VDC
30W PoE Mode: 48-56VDC 90W PoE Mode: 52-56VDC(IEEE802.3bt model) |
|
| Connector | 1 removable 6-contact terminal blocks
Pin 1/2 for Power 1, Pin 3/4 for Power 2, Pin 5/6 for fault alarm |
|
| Protection | Overload Current Protection, Reverse Polarity Protection | |
